Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

介孔Co3O4-CeO2复合氧化物的制备及在CO选择性氧化中的应用

以硝酸钴和硝酸铈为前驱物，SBA-15为硬模板，利用双溶剂法制备了Co3O4-CeO2介孔复合氧化物，通过X-射线衍射、N2吸脱附测试、程序升温还原和透射电子显微镜等技术对活性组分及载体进行了表征，并且与浸渍法和共沉淀法所制备的催化剂进行了对比分析。结果表明，相比于浸渍法和共沉淀法，采用双溶剂法制备的介孔Co3O4-CeO2复合氧化物具有均匀的介孔结构、较小的颗粒尺寸、较大的比表面积和较高的活性组分分散度。此外，CO氧化脱除评价显示与常规的共沉淀法和浸渍法所制备的催化剂相比该介孔复合氧化物具有较高的反应活性和选择性，其高活性主要归因于较高的比表面积和活性组分的高分散度。     

Oxidation of Heterocyclic Compounds by Permanganate Anion. (Review)

Data on the oxidative transformations of heterocyclic compounds with permanganate anion are reviewed     

DSC combined with chemiluminescence for studying polymer oxidation

The oxidation of (Ti,W)C ceramics have been studied as a part of the program to investigate of properties of powder materials. Thermogravimetry, derivative thermogravimetry (TG-DTG), and differential thermal analysis DSC have been used in the non-isothermal study of powder oxidation (Ti,W)C in dry air atmosphere. The powder of crystalline carbide cermets with a ratio of W:Ti equals 0.3 was used in this study. The diagrams were recorded on a sample mass 3.42 mg on the Setaram apparatus in temperatures ranging from 25 to 1000°C. Seven different heating rates were used. The analytical techniques SEM, WDX, EDX and XRD were used in the research. The kinetics of the oxidation process was followed by the integral method by applying the Coats-Redfern's approximation. The kinetic models of particular stages of (Ti,W)C oxidation were evaluated from the dynamic mass losses data. The values of apparent activation energy E and the pre-exponential factor A of each stage of the oxidation were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

过渡金属离子对HPAsMoVO杂多酸的氧化性能的影响

用H2-TPR方法研究了过渡金属离子及其含量对杂多酸-HxPAs0.2Mo10VOy的氧化性能的影响,并在固定床反应器上考察了M0.2HxPAs0.2Mo10VOy(M=Fe3 、Co2 、N i2 和Cu2 )催化剂对异丁烷选择性氧化的催化性能.研究结果表明用过渡金属离子取代杂多酸中的质子,可以在较大程度上增强杂多酸的低温氧化能力,其中Fe3 对增强杂多酸的催化活性最为明显,而Cu2 却有利于提高目的产物甲基丙烯酸的选择性.     

介孔混合氧化物催化剂La-Co-Zr-O的制备与表征

 采用柠檬酸络合-有机模板剂分解法制备了(La+Co)/(La+Co+Zr)原子比为0.5的La-Co-Zr-O催化剂,并与传统的共沉淀法制备的La-Co-Zr-O催化剂进行比较. N2物理吸附结果表明,采用模板剂法制备的催化剂样品具有较大的比表面积(96.6～117.6 m2/g)和十分均匀的孔径(3.5～4.3 nm); X射线衍射、X射线光电子能谱和X射线吸收精细结构表征结果一致表明,催化剂中活性组分主要为高分散的Co3O4微晶(粒径为23～33 nm), 模板剂法制备的催化剂中所有组分的分散性均优于共沉淀法制备的催化剂. 程序升温还原实验结果表明,采用聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵为混合模板剂制备的催化剂中Co3O4更容易被还原. Co-O 键的活动度与催化剂催化氧化反应的活性密切相关.     

纳米二氧化钛-高锰酸钾协同光催化氧化体系快速测定化学需氧量

以纳米TiO2-KMnO4协同光催化氧化体系为基础,结合分光光度法建立了一种快速测定水样中化学需氧量(COD)的简便方法。本方法具有线性范围宽、抗氯离子干扰能力强等优点。在选定的最优条件下,线性范围为0.1~320mg/L;当氯离子含量在1500mg/L以内时,相对误差小于5%。此方法适用于污染程度低的自来水、地表水或中等污染程度的工业废水中COD值的快速测定。     

(R)-4-Menthenone in the synthesis of optically pure sex pheromone of the peach leafminer moth (Lyonetia clerkella)

The synthesis of (14S)-methyloctadec-1-ene, sex pheromone of the peach leafminer moth (Lyonetia clerkella), is described to demonstrate a new potential of the synthetic use of (R)-4-menthenone.     

Selective Oxidation of Isobutene over CsFeCoBiMnMoOx Mixed Oxide Catalyst

Mixed oxide catalyst Cs0.1Fe2Co6BiMnMo12Ox was prepared by the coprecipitation method.Selective oxidation of isobutene was carried out in a fixed-bed reactor over Cs0.1Fe2Co6BiMnMo12Ox.The results showed that the catalyst had high catalytic activity. Under the optimum reaction conditions(n(i-C4):n(O2)=1:2-1:4, space velocity=180 h^-1, T=360℃), the yields of methacrolein and methacrylic acid can reach 80% and 8%, respectively. The total yield of liquid products (methacrolein, methacrylic acid and acetic acid) can reach about 90%.